See "Encapsulated Lead" discussion: http://www.pearsonariel.org/discussi...hread.php?t=27Originally Posted by SkipperJer
and "Extra Pearson Ballast" http://www.pearsonariel.org/discussi...hread.php?t=31
Remember the Search button . .
See "Encapsulated Lead" discussion: http://www.pearsonariel.org/discussi...hread.php?t=27
and "Extra Pearson Ballast" http://www.pearsonariel.org/discussi...hread.php?t=31
Remember the Search button . .
Alberg designs tend to squat I have found. My Cape Dory Typhoon does, my friends CD 27 does, half the ariel photos I have run across show it. My outboard weighs 60 pounds, Gas tank full is another 15, I plan to keep a small anchor in the stern lazerette as well, theres another 20 pounds. I prefer the boat sits without the squat and removing the lead should help. I know the lead keeps the weight down low where it should be on a boat like this, and that it could affect the performance, but for this summer I don't plan on putting it back. If I feel as though it needs to be put back in next summer to compare I will. For this summer however they stay out. I weigh 210 so I'll just lay down on the cockpit sole if it gets to nasty out there.
Last edited by Tim Mertinooke; 05-13-2007 at 02:10 PM.
It's nice to have wrapped things up below the waterline, I am pretty sure she won't sink. Now my energies go to the interior. After seeing so many inspirational photos browsing this site, I decided to paint the interior gloss white with brightsides, then replace the original lights with brass ones from ABI. I hope to have things prepped this week and paint this weekend weather permitting.
The replacement lights
Some befores of the bulkhead. The two new lights are going exactly where the other ones were (at least for this year anyway) for the sake of ease.
After removing the weird foam placed in the gap between the bulkhead and the cabin trunk, there was a space that needed to be filled. I decided to use a painter's caulk to make it look like a tight fit. The teak trim of course will be varnished. My hope is that this dark, multicolored, cave of a cabin transforms into a bright and airy one.
Here is the nicely cut bulkhead that left the shop floor in RI 45 years ago. Now that's craftsmanship (note sarcasm in voice.)
Here is a shot after the first coat. the second coat today should make it look awesome. I decided to do it in stages as I have limited time after work. The sides will be done next followed by the aft part of the cabin. I have some teak pieces let over from a job my dad did and I will be using those to make teak trim around the top and sides of the bulkhead.
Last edited by Tim Mertinooke; 05-25-2007 at 01:07 PM.
Here's a nibble of what I'll also be doing to the boat this weekend...
Can't a tendency to squat be countered by balancing with weight and ballast? For instance if you have 100# way out at the stern why not try a similar weight in or near the forepeak? Certainly would counter any hobby horsing....?
Sounds good, but I liken this game to leveling a chair by shaving a little off one of the legs.
I plan to remove the cabin sole this winter and epoxy/glass over the porous roving so hastily thrown in by Pearson. I will also be removing a section in the V-berth sole similar to what Bill(231) did for access there. I want a smooth transition from bow to sump for water to flow and mght try some creative drain/pipe thing for water from the anchor locker to flow. I like Ebb's pipe idea, although I don't think mine will be that elaborate. The entire bilge will be faired and painted as well and I want access to the entire bilge so I might change the access panels when I put the new sole in. I think by adding weight, it would complicate my plan because I wouls want it removable, but don't want free pieces of lead able to scoot around. A-24's on a diet, I just assume keep the weight out.
Last edited by Tim Mertinooke; 05-23-2007 at 05:04 PM.
Here is the second coat (the door got its first today though.) I'm thinking one more coat tomorrow like they recommend and then I'll start painting the sides which is a puke yellow. Yellow...Yellow...Yellow...I can't wait until the whole boat is de-yellowed.
My yacht lamps came in yesterday and I can't wait to throw them on once painting is complete. What a difference a coat of paint makes. Slowly but surely!
Tim
you are going to like those lights, I've got the same model in the main cabin in A-231. They've held up well for 8 seasons with no corrosion (unlike an earlier pair that lasted just two). Are you putting any lights in the "galley" side?
bill
There is a dome light there, but I haven't decided if I will replace that one or add something different. I plan on working that detail out this summer once I actually use the boat. Glad to hear the lights held up that well, they sure do look great. I am going to add two more in the v-berth, but I decided to leave the v-berth alone for now because I am going to do a marathon session in the future (winter maybe?) grinding and fairing there. One thing and section of the boat at a time. I'm 31, but I wish I was retired so I could wake up in the morning and ask myself "what part of the boat will I work on today", not "I wonder if I will be able to work on the boat today?" Too few hours in a day and its really too bad we humans need to sleep...think of the possibilities...
It was too hot and muggy yesterday to paint the interior or varnish my brightwork so I decided to continue my assault on the bilge.
I poured a fair amount of epoxy into bilge to seal the area up after prepping by sanding and an acetone wash. Water would make its way through the laminate somehow and migrate out the shoe. I tested and verified this happening through a controlled experiment last month. I'm not entirely sure the path the water took whether it was through a fissure or through laminate that was compromised through the exposure of water over such a long period of time, but water and gravity did its thing exploiting a weakness somewhere. After letting the area dry out completely over the past month, I tilted the boat back with a jack and poured the epoxy. By tilting the boat back the epoxy ran backwards and pooled over the area the rudder shoe is located. After this kicked so that it wasn't tacky, I grinded the areas of the bilge where there were tumor-like things sticking out. These were areas of random saturated roving that fell from above or folded in the process of layup. Some of these bulges were filled with water, so they may also have been blisters. This area was filled with water for a VERY long time so blisters are certainly a possibility. After removing these tumors, then prepping and cleaning the area up I applied another large amount of epoxy, this time thickened. I plan to prep this coating today and put another thick layer of thickened epoxy on tonight followed by a thin coating poured on after that thickened layer coold down. This last unthickened layer will create a nice smooth finish on the bottom. My next step is to continue peeling and scraping off the excess resin Pearson coated the bilge with, then rolling on epoxy as a barrier coat, then painting with bilgekote. A lot of work in the end, but I will have the deep, accessible, smooth bilge I wanted that only alloows water in or out upon my command. Plus one keel void will be gone...right?
I fabricated a tool to grind down the weird high spots in the bilge by duct-taping a dremel and 80 grit flapwheel onto a broom handle. I had worklight and shop vac bolw the sole which worked very well as I had plenty of light to see through the dust and the dust was quickly removed va the shop vac. There was no dust in the cabin from the grinding that I could see. You are looking at the aft end of the bilge where the rudder shoe is located. You can see the epoxy that I had poured earlier in the day.
Here is what the area looked like after I grinded down the tumors and shop vacuumed the dust out.
The next step was to prep the poured epoxy and add the thickened coat which I used to build up a few areas and fair others at the bottom of the bilge. The tool of choice was a plastic putty knife duct-taped to the end of a broom stick. This worked well as I just needed the material spread out and somewhat fair as another coat will go on top.
Result thus far.
This is the aft section of the lead ballast. I have witnessed water coming out of this area from the void between the keel and lead ballast. After prepping the laminate, I goped a large amount of epoxy here. I will be adding a lot more here later to ensure a nice thick barrier preventing the transfer of water.
Last edited by Tim Mertinooke; 05-25-2007 at 01:12 PM.
After five coats of Epifanes varnish all of the brightwork on the boat is done except for some small interior teak pieces that I didn't want to remove. Today I put on the coamings and winch blocks, tomorrow I am putting everything else back on. I am bedding the pieces with lifecalk mahogany colored caulking. I also hope to finish painting the interior this weekend (hopefully anyway.) My wife is making cushion covers for the nice cushions that came with the boat. This was one of the things the PO bought and used only one season and they look it. She is coming together.
If only the rest of the boat looked this good...
150 mile transport was uneventful. Phew! There is nothing more stressful than trailering.
Arrived at the marina right on time.
Haven't gotten around to changing the name on the transom yet as I was too busy getting her ready to float. Maybe next year. Wooden banner?
After a 10 year dry vacation, she floats! That's my dad checking her out. There wasn't one drop of water in my bilge. Yippee!
After a short trip down river we docked at the yacht club.
Proud moment.
Tomorrow we put the mast up and head home. Then we are coming back Tuesday to spend a few days onboard and will do a little trip to Essex Bay. This is what it is all about.
Many CONGRATS!!!!!!!!!!!!!!!
Posting Permissions
Reply With Quote
